1.1 Composition: EVA

1.2 Application: For wood veneer, melamine,PVC edge banding, ABS edge banding to seal hard wood,chipboard or MDF

1.3 Characteristics: excellent initial adhesion, good thermal stability,good fluidity

1.4 Technical Data:

1.4.1 Apprearance:granule solid

1.4.2 Brookfield viscosity (204℃)/mPa.s:8000-10000cps

1.4.3 Soften point:105±5℃

1.5 Working conditions:

1.5.1 Machine   :                    suitable for all automatic edge banding machines

1.5.2 Environmental temperature:     =15℃

1.5.3 Material temperature:          =15℃

1.5.4 Moisture Content of material : =10%

1.5.5 Glue-coated roller temperature:190-210℃

1.5.6 Adhesive groove temperature:   180-200℃

1.5.7 Machine pressure:              2.5-5kg/cm

1.5.8 Feed rate:                     =10m/min

Final conditions are subject to adjustment of different machines.

1.6 Operating suggestions:

1.6.1 Inspect surface of glue-coated roller frequently to remove the impurity and ensure uniform glue spread

1.6.2 Correct temperature difference of temperature control system frequently

1.6.3 Temperature shall be lowered by 40-50℃ at working gap

1.6.4 Glue-coated roller shall be set at 205℃ while environmental and material temperature are near 15℃

1.6.5 Hot melt adhesive that hasn’t been used is to be seal storage to avoid being polluted and moisture absorbing

1.7 Packing:25kg/bag(in green bag)

1.8 Storage:kept in shady,cool and dry warehouse, sun-screen, fireproof, heat protection, moisture proof，and can keep for at least one year.This product belongs to non-dangerous goods